LED Waterproof Refrigerator Light - 1 meter

Waterproof Rigid LED Bar that can be immersed for a short period of time or take splashing water on a daily basis. The entire bar has been coated with a waterproofing. The connectors are special water proof types. The product is shipped as shown above, with one connector at each end. There is one male and one female connector on each bar so they can easily be connected together. Yes, you can mix half meter and full meter bars. The connectors are the same. The Bar to Power Supply Cable is to be put at the end of the run and is to be ordered separately.

PROPERTIES:

Length - 1 meter Dimensions: Sold in two lengths: Half Meter (19.7") long x .36" tall x .59" wide, and also 1 Meter long x .36" tall x .59" wide LED: 30 each smd/surface mount LED for the half meter bar, 60 for the full meter bar Voltage In: 12vdc Mounting: use attached double sided tape or Mounting Clip as shown here. Watt Consumed: 1.92 watts - 160mA for the half meter bar, 3.84 watts - 320mA for the one meter bar Light Output: Approx. 120 lumens for the half meter bar, 240 for the 1 meter bar. CE, RoHS Compliant

COMES IN 2 COLORS: WARM WHITE- TASK LIGHTING- DAYLIGHT: 6000K COOL WHITE: 4500 K

These products require the use of a Transformer. Which size?? Multiply the "Current Draw" from the table above for your color by the number of units to be powered. The result is the total current draw or amperage you will need. Derate your transformer by 20% for safety. Low voltage dimmers are also available. Please see transformers/Power Supply Below.